Resources

Here are some of the resources to gather more and more information about electronics.

Hope you will find it useful.












Comments

Post a Comment

Popular posts from this blog

Decoupling capacitor

 ðŸ‘‰What is decoupling capacitor ? In electronics we use some circuits which are highly sensitive to current and voltage spikes, voltage fluctuations and electrical noise we need to protect these devices. And capacitors are used to filter voltage and also they protect microchips from electrical noise. So, these capacitors which are used to protect circuit from external noise and voltage spikes and fluctuations are called as decoupling capacitor. They separate device from other circuit to which they are connected.  👉Where to place decoupling capacitors on PCB ? These circuits are placed as close as possible to microchip. They also provide extra energy to the IC's and remove disturbances to the logic signal.  What type of capacitors we should use for decoupling ? 1. Ceramic COG : small, low loss 2. Ceramic X7R : small, low loss and higher values than COG Above types of capacitor's are mostly preferred in RF decoupling applications. 3. Electrolytic capacitor from 0.1uf to 10...
Read more

CAPACITOR HACKS

Image
 Here are some interesting capacitor hack questions you may like to know. 1. Why electrolytic capacitors have polarities ? > Electrolytic capacitor has polarity markings, since the dielectric is formed by chemical reaction between electrolytes and anode plate, which holds some potential inside them. There dielectric is oxide layer which is formed by passing current in one direction from anode to electrolyte. 2. What will happen if we reversed polarity of capacitor ? >  If the polarity is reversed while connecting, the dielectric in the form of oxide layer is damaged. A heavy current flows, large amount of heat is generated and capacitor gets damaged. An explosion can result if it not provided with safety against explosion. But this happens with only polarized capacitor non polarized capacitor doesn't get damage. 3. Why do electrolytic capacitors have positive and negative terminals whereas the polarity of charge changes according to the charging and discharging of the ca...
Read more

What we do for you ...

Image
PCB Design PCB design is one of the complex processes in industries. There are various factors we need to consider while design a single mistake in design can ruin your product. So why are you having this risk and headache with you. Give your headache to us to build your idea into action. We have experience over multilayer and several single layer PCBs of different size and shapes. We have experience from general electronic products to high reliability electronic products. From security and surveillance product to highly sensitive automobile products. Your headache is just one step away from your call ... Schematic capture and technical guidelines So, you have an idea and don't know how to build it, we are there for you. From block design, schematic capture and component selection we provide support in various function. We also provide support in technical documentation like BOM creation and artwork.
Read more